SE Electronics DCM3 Dynacasters
Microphones, audiolink, Studio Equipment, Audio Interface, DJ-Equipment, Musical Instruments, Podcast Equipment, Processors
- With a sophisticated class-A design and high-grade FETs, the DM1 has a low self-noise. It is built with a dedicated output buffer amplifier allowing it to drive long cable runs and reduce RF interference, buzz, and hum.
- The rugged metal housing of DM1 Dynamite provides efficient rejection of noise and electrical interference. You can use the mic on stage or for studio recordings.
- sE Electronics DM1 Dynamite In-line Mic Preamplifier. 2 20-Foot Balanced XLR Cables Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). 7-Pack of Hook-&-Loop Cable Ties.
SE Electronics DCM6 Dynacaster- DCM6
- Active inline preamp for podcasting, recording and live sound
- It has an ultra-high impedance input and 8 load settings that match any passive microphone (dynamic/ribbon) and provides a medium +15 dB or explosive +30 dB gain up
- Eight impedance settings and buffer amplifier ensure consistent gain regardless of connection load
- Slim, solid metal housing and premium finish
- DM2 is a passive microphone product (dynamic and ribbon). Not for use with microphones (condenser or active ribbons) that require phantom power. Also, a separate preamp/mixer/audio interface is required to supply 48V phantom power to drive DM2
sE Electronics DCM8 DynaCaster Microphone
Dynamic Instrument Microphone
- Polar pattern: supercardioid
- Frequency range: 30 - 19,000 Hz
- Impedance: 300 ohms
- Sensitivity: 2.0 mV / Pa (-54 dB)
- Robust metal housing with roll-away protection
- Dimensions (Ø x L): 47 x 176 mm
- Weight: 269 g
- Incl. microphone mount, thread adapter, integrated windscreen (black) and microphone pouch
SE Electronics SE 2200 Microphone
Large-Diaphragm Condenser Microphone
- Polar pattern: cardioid
- Gold-plated 1" double membrane
- 10/20 dB pad switch
- 80/160 Hz low-cut switch
- Frequency range: 20 - 20,000 Hz
- Max. SPL: 125/135/145 dB (0/10/20 dB pad)
- Requires +48 V phantom power
- Dimensions (L x Ø): 215 x 51 mm
- Weight: 611g
- Including insulation pack, consisting of elastic microphone holder and pop filter
SE ELECTRONICS sE2300 Multi Pattern Large Diaphragm Condenser Mic with Shock-mount and Filter
- HANDCRAFTED 1" CONDENSER CAPSULE: Delivers top-notch sound quality with versatile operation in cardioid, omni, and figure-8 polar patterns.
- HIGHPASS FILTER (80Hz/160Hz): Enhances audio clarity by reducing unwanted low frequencies.
- -10dB/-20dB PAD: Offers advanced onboard sound-shaping options for flexible recording.
- EXTREMELY LOW NOISE & HIGH SPL HANDLING: Provides an extended dynamic range with max SPL up to 146dB (0dB/-10dB/-20dB attenuation pad).
- INCLUDES SHOCKMOUNT AND POP FILTER: Improves recording quality by minimizing noise and plosives.
SE Electronics sE4400a Microphone
- Polar pattern: cardioid, omnidirectional, hyper-cardioid, eight
- Frequency range: 20 - 20,000 Hz
- Sensitivity: 25mV/Pa (-32 dBV) ± 1dB
- Equivalent noise level: 13dB(A)
- Max. SPL at 0.5% THD: 137 / 147 / 157 dB (0 / 10 / 20 dB pad)
- Low-cut filter switchable at 40 / 80 Hz (6 dB/oct)
- Requires 48V phantom power
- Dimensions: 58 x 29 x 146 mm
- Weight: 0.29 kg
- Incl. SH21 shock mount and case
SE Electronics T2 Titanium microphone
- With special titanium diaphragm
- Polar pattern: cardioid, omnidirectional, hyper cardioid, eight
- Frequency range: 20 - 20,000 Hz
- Sensitivity: 25mV/Pa (-32 dBV)
- Equivalent noise level: 13dB(A)
- Max. SPL at 0.5% THD: 137 / 147 / 157 dB (0 / 10 / 20 dB pad)
- Low-cut filter switchable at 40 / 80 Hz (6 dB/oct)
- Requires 48V phantom power
- Dimensions: 58 x 29 x 146 mm
- Weight: 0.29 kg
- Incl. SH21 shock mount and case
SE Electronics X1A Studio Microphone
Condenser Microphone
- With 2/3" capsule
- Polar pattern: Cardioid
- Frequency range: 20 - 20000 Hz
- Impedance: <50 Ohm
- Sensitivity: 20 mV / Pa (-34 dB)
- Signal-to-noise ratio: 78 dB (A)
- Equivalent Noise level: 16 dB (A)
- Dynamic range: 114/134 dB (0/20 dB pad)
- Low Cut Filter: 100 Hz, 6 dB / Oct, switchable
- Attenuation: 20 dB, switchable
- Connectivity: 3-Pin XLR connector
- Power requirement: 48 V phantom according to IEC 61938
SE Electronics X1R Microphone
- Well suited for picking up guitar amplifiers
- Wooden / brass instruments
- String instruments
- Drum overheads
- Broadcast
- Voiceover and much more
- Type: Passive
- Capsule: aluminium ribbon
- Frequency response: 20-16000 Hz / - 1 dB
- Sensitivity: -55.3 dB 1V / Pa / - dB
- Directional characteristics: Figure Eight
- Impedance: 200 Ohm
SE Electronics X1S Microphone
Large-diaphragm condenser microphone
- Polar pattern: Cardioid
- Handmade capsule
- Noise: 9 dB (A)
- Boundary sound pressure level: up to 160 dB (THD 0.5%)
- LoCut filter: 80 Hz, 160 Hz
- Pad: 0 dB, -10 dB, -20 dB
- Gold-plated XLR contacts
- Requires 48 V phantom power
- Dimensions (diameter x height): 58 x 168 mm
- Weight: 440 g
SE Electronics X1S Studio Bundle
Large Diaphragm Condenser Microphone Studio Set
- Consisting of sE X1S microphone, sE RF-X acoustic screen, elastic suspension with pop screen and 3m microphone cable
Features sE X1S Microphone:
- Large-diaphragm condenser microphone
- Polar pattern: Cardioid
- Handmade capsule
- LoCut filter: 80 Hz, 160 Hz
- Pad: 0 dB, -10 dB, -20 dB
- Gold-plated XLR contacts
- Noise: 9 dB (A)
- Boundary sound pressure level: up to 160 dB (THD 0.5%)
- Requires 48V phantom power
