Showing all 10 results

Behringer TM1 Complete Vocal Recording Microphone

160,000.00
  • Gold-plated 1" capsule
  • Directional characteristic: cardioid
  • Extremely low noise circuit design
  • Requires +48 V of phantom power
  • Frequency range: 20 - 20,000 Hz
  • Sensitivity:-34 dB (+/- 2 dB) at 1 kHz (0 dB)
  • Inherent noise: 4.5 dB(A) SPL

IK Multimedia iRig Stream

210,000.00
  • For streaming applications with mobile devices or computers
  • Adjustable stereo RCA input for line signals
  • Level indicator with 3 LEDs
  • Connection for headphones or headsets with a 3.5 mm jack, CTIA, including mic level- and volume control
  • Direct monitoring for real-time monitoring or playback
  • Quality AD/DA conversion with up to 24 bit / 48 kHz
  • Powered via USB or power supply (power supply available under Article Nr 417705, not included)
  • Frequency range: 20 - 20,000 Hz

Microphone Cable (XLR Male to Female)

12,000.00
  • FOR LIVE SOUND & RECORDING: XLR male to female microphone cable for studio recording and live sound
  • 3 PIN CONNECTORS: Zinc alloy 3-pin connectors with nickeling
  • DURABLE & FLEXIBLE: Protective metal housing and flexible 6.0mm PVC jacket
  • CLEAR TRANSMISSION: All-copper conductors with inner copper spiral shielding to reduce noise interference
  • PLUG & PLAY DESIGN: Easily use with XLR-compatible PA systems, speakers, and other sound equipment

SE Electronics DCM3 Dynacaster DCM 3

305,000.00
  • With a sophisticated class-A design and high-grade FETs, the DM1 has a low self-noise. It is built with a dedicated output buffer amplifier allowing it to drive long cable runs and reduce RF interference, buzz, and hum. 
  • The rugged metal housing of DM1 Dynamite provides efficient rejection of noise and electrical interference. You can use the mic on stage or for studio recordings.
  • sE Electronics DM1 Dynamite In-line Mic Preamplifier. 2 20-Foot Balanced XLR Cables Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). 7-Pack of Hook-&-Loop Cable Ties.

SE Electronics DCM6 Dynacaster- DM2

315,000.00
  • Active inline preamp for podcasting, recording and live sound
  • It has an ultra-high impedance input and 8 load settings that match any passive microphone (dynamic/ribbon) and provides a medium +15 dB or explosive +30 dB gain up
  • Eight impedance settings and buffer amplifier ensure consistent gain regardless of connection load
  • Slim, solid metal housing and premium finish
  • DM2 is a passive microphone product (dynamic and ribbon). Not for use with microphones (condenser or active ribbons) that require phantom power. Also, a separate preamp/mixer/audio interface is required to supply 48V phantom power to drive DM2

SE Electronics DM1-DI Dynamite Active DI, Orange and Black

175,000.00
  • Ultra-HiZ input for getting the best out of your instrument
  • Massive headroom for even the hottest instruments
  • Reinventing the ground lift switch
  • Lockable 1/4” input jack and custom sE plug keychain
  • Dedicated Class-A output buffer amplifier

Solid State Logic SSL 2 Audio Interface

305,000.00
  • 24-Bit/192 kHz AKM converters
  • Mic preamps (62 dB gain range, 130.5 dBu ON)
  • Neutrik connectors
  • Alps pots
  • Legacy "4K" switch per channel for sounds inspired by the legendary SSL 4000 series
  • +48 V Phantom power
  • 5-Stage level meter for each input
  • 2 Mic-/Line-/Instrument inputs: combo XLR/jack 6.3 mm
  • 2 Monitor outputs: 6.3 mm jack, balanced
  • Stereo headphone output: 6.3 mm jack
  • USB bus-powered

Solid State Logic SSL 2+ Audio Interface

425,000.00
  • 24-Bit/192 kHz AKM converters
  • Mic preamps (62 dB gain range, 130.5 dBu ON)
  • Neutrik connectors
  • Alps pots
  • Legacy "4K" switch per channel for sounds inspired by the legendary SSL 4000 series
  • +48 V Phantom power
  • 5-Stage level meter for each input
  • MIDI input and output
  • 2 Independently controllable headphone outputs

SSL UF1 USB DAW controllers

1,100,000.00
  • Transport buttons and weighted jog/scrub wheel
  • Touch-sensitive 100 mm motorized fader
  • 4 + 1 knobs with push function
  • 2 High-resolution TFT LC color displays (4.3" / 1.77") for displaying track names, parameters, SSL meter plug-in details, among other things
  • Illuminated RGB "Soft Feel" buttons
  • Metal body with brushed anodized top panel
  • Control up to 3 different DAWs simultaneously
  • HUI and MCU DAW Profiles for Pro Tools, Logic, Cubase, Studio One, Ableton Live, LUNA, Pyramix
  • Multifunctional, rasterized master encoder for comfortable DAW navigation, track banking and mouse wheel emulation

Universal Audio Volt 176 Audio Interface

220,000.00
  • 24 bit / 192 kHz AD/DA converter
  • Integrated microphone preamp with vintage mic preamp mode
  • Integrated 76 compressor (based on the UA 1176)
  • +48 V phantom power switchable
  • Headphone amplifier
  • Direct monitoring
  • USB bus-powered
  • Compatible with PC (Windows 10 64 bit), Mac (macOS 10.14 Mojave or higher), iPad and iPhone (iOS 14 or higher)