PreSonus PX-1 Large Diaphragm Cardioid Condenser Microphone
PreSonus Revelator USB Condenser Microphone
Microphones, Conference System, Studio Equipment, Studio Mics, Musical Instruments, Podcast Equipment
- Voice effects processing onboard with 8 professionally-crafted and easy-to-use presets. Choose from presets such as: Broadcast, Female Vocal, Space Overlord, Screamer, Slap Echo, Android, AM Radio, as well as standard Reverb and Delay. 8 Additional Preset slots available so you can create your own sounds.
- Onboard control for headphone volume, mic gain, mute, and preset switching and the included UC Surface software mixer to access all of the same controls and more on your computer
- 6-in/6-out audio interface | 1 dedicated microphone stream for analog recording | 2 dedicated output for headphone monitoring | 4-in/4-out virtual streams for application-to-application recording and playback with loopback options for macOS and Windows
- Pristine microphone with 3 polar patterns for maximum flexibility | Cardioid for single source applications | Omnidirectional to pick up the entire room | Figure-8, perfect for interviews and collaboration
Rode NT-1000 Studio Microphone
Rode NT-2000 Studio Microphone
- Large 1” HF1 gold sputtered capsule
- Continuously variable polar pattern, from Omni to Cardioid to Figure 8 controlled on the mic
- Continuously variable PAD and High-Pass Filter
- Ultra low noise, transformerless surface mount circuitry
- Wide dynamic range
- High strength welded and heat treated steel mesh head
- Internal capsule shock mounting
Rode NT1 – GS 5th Generation Black
- With Dual Connect connector
- Gold-plated 1" capsule
- High-gain Revolution preamp
- Polar pattern: cardioid
- 32-bit floating point audio
- Inherent noise: 4dBA
- Sensitivity: 25mV/Pa
- Limiting sound pressure level: 142dB SPL
- Frequency response: 20 - 20,000 Hz
- A/D conversion: up to 192kHz sampling rate
- Built-in DSP with high-pass filter, noise gate, compressor and Aphex
- Dual Connect connector: XLR3-M (analogue) and USB-C (digital)
Rode NT1 Kit Microphone
- Gold-plated 1" capsule stored in miniature lyre from Rycote
- Black metal housing with scratch-resistant ceramic coating
- Extremely low intrinsic noise (4.5 dBA)
- 10 Year guarantee for registered users (special guarantee between manufacturer and buyer)
- Polar pattern: Cardioid
- Frequency range: 20 - 20000 Hz
- Output impedance: 100 ohms
- Sensitivity: 35.0 mV / Pa
- Equivalent noise level: 4.5 dBA (according to IEC651), Max
- Output level: +8.0 dBu (1 kHz, 1% THD, 1 kOhm load)
- Dynamic range: 128 dB
Rode NT1-A Studio Microphone
Rode NT2-A Studio Microphone
SE Electronics DCM3 Dynacasters
Studio Equipment, Audio Interface, Microphones, audiolink, DJ-Equipment, Musical Instruments, Podcast Equipment, Processors
- With a sophisticated class-A design and high-grade FETs, the DM1 has a low self-noise. It is built with a dedicated output buffer amplifier allowing it to drive long cable runs and reduce RF interference, buzz, and hum.
- The rugged metal housing of DM1 Dynamite provides efficient rejection of noise and electrical interference. You can use the mic on stage or for studio recordings.
- sE Electronics DM1 Dynamite In-line Mic Preamplifier. 2 20-Foot Balanced XLR Cables Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). 7-Pack of Hook-&-Loop Cable Ties.
SE Electronics DCM6 Dynacaster- DCM6
- Active inline preamp for podcasting, recording and live sound
- It has an ultra-high impedance input and 8 load settings that match any passive microphone (dynamic/ribbon) and provides a medium +15 dB or explosive +30 dB gain up
- Eight impedance settings and buffer amplifier ensure consistent gain regardless of connection load
- Slim, solid metal housing and premium finish
- DM2 is a passive microphone product (dynamic and ribbon). Not for use with microphones (condenser or active ribbons) that require phantom power. Also, a separate preamp/mixer/audio interface is required to supply 48V phantom power to drive DM2
sE Electronics DCM8 DynaCaster Microphone
Dynamic Instrument Microphone
- Polar pattern: supercardioid
- Frequency range: 30 - 19,000 Hz
- Impedance: 300 ohms
- Sensitivity: 2.0 mV / Pa (-54 dB)
- Robust metal housing with roll-away protection
- Dimensions (Ø x L): 47 x 176 mm
- Weight: 269 g
- Incl. microphone mount, thread adapter, integrated windscreen (black) and microphone pouch
SE Electronics SE 2200 Microphone
Large-Diaphragm Condenser Microphone
- Polar pattern: cardioid
- Gold-plated 1" double membrane
- 10/20 dB pad switch
- 80/160 Hz low-cut switch
- Frequency range: 20 - 20,000 Hz
- Max. SPL: 125/135/145 dB (0/10/20 dB pad)
- Requires +48 V phantom power
- Dimensions (L x Ø): 215 x 51 mm
- Weight: 611g
- Including insulation pack, consisting of elastic microphone holder and pop filter
