MUSICAL EQUIPMENT E-STORE
Through our ecommerce website we provide superior quality studio and music equipment at competitive prices and at steadfast timeliness
For Music & Quality Musical Instruments Sales, Repair and Maintenance.
We sell Quality Brand New Products and US Used products Only. All US used equipments are properly checked, serviced and well tested before we display for sale. We gladly allow customers “who are not satisfied with any products sold to them” the chance to swap Products with any other ones they want, else we gladly refund their money.
STUDIO EQUIPMENT
AKG P420 Studio Microphone
AKG C3000 Studio Microphone
- Gold-sputtered 1-inch large diaphragm with patented edge-terminated back-plate technology
- Proven performance for more than 15 years for both studio and stage
- Internal windscreen protects from wind and breath generated "pops"
- Well designed circuitry provides high SPL capability and low distortion
- Switchable attenuation pad enables for high SPL up to 150 dB
- Switchable low cut filter (500Hz, 6 dB/octave) eliminates proximity effect
Audio-Technica AT2020 Cardioid Condenser Studio XLR Microphone
- The price/performance standard in side address studio condenser microphone technology
- Ideal for project/home studio applications; The noise level is 20 dB SPL
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom engineered low mass diaphragm provides extended frequency response and superior transient response
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. Output connector: integral 3 pin XLRM type
Audio-Technica AT2020USB Cardioid Condenser USB Microphone
- Condenser microphone with USB output for digital recording
- High quality A/D converter with 16 bit, 44.1/48 kilohertz sampling rate for superb audio
- Headphone jack with volume control allows you to monitor the microphone signal with no delay
- Mix control allows you to blend your microphone signal and prerecorded audio
- High output, the internal headphone amplifier delivers superior clarity and musical detail as well as more volume overall
- Compatible with Windows 7, Vista, XP, 2000 and Mac OS X
Rode NT1 Kit Microphone
- Gold-plated 1" capsule stored in miniature lyre from Rycote
- Black metal housing with scratch-resistant ceramic coating
- Extremely low intrinsic noise (4.5 dBA)
- 10 Year guarantee for registered users (special guarantee between manufacturer and buyer)
- Polar pattern: Cardioid
- Frequency range: 20 - 20000 Hz
- Output impedance: 100 ohms
- Sensitivity: 35.0 mV / Pa
- Equivalent noise level: 4.5 dBA (according to IEC651), Max
- Output level: +8.0 dBu (1 kHz, 1% THD, 1 kOhm load)
- Dynamic range: 128 dB
Rode NT1 – GS 5th Generation Black
- With Dual Connect connector
- Gold-plated 1" capsule
- High-gain Revolution preamp
- Polar pattern: cardioid
- 32-bit floating point audio
- Inherent noise: 4dBA
- Sensitivity: 25mV/Pa
- Limiting sound pressure level: 142dB SPL
- Frequency response: 20 - 20,000 Hz
- A/D conversion: up to 192kHz sampling rate
- Built-in DSP with high-pass filter, noise gate, compressor and Aphex
- Dual Connect connector: XLR3-M (analogue) and USB-C (digital)
AKG P120 Studio Microphone
- Side-address microphone with cardioid pattern and gold-sputtered diaphragm to prevent shorting to the back electrode at high sound-pressure levels
- Capable of handling sound-pressure levels up to 150 dB with no apparent distortion
- Switchable low-cut filter at 300 Hz and switchable 20 dB pad
- All-metal body for rejection of RF interference
- Sturdy front grille protects microphone from tough handling
- Built to resist high temperatures and humidity
HOT DEALS
MUSICAL EQUIPMENT
IK Multimedia iLoud MTM 100W Studio Monitor Speaker (Pair), Portable & high-Performance Speaker with 3″ woofers & 3.5″ Tweeter
- Mix longer with less effort: iLoud MTM uses a midrange-tweeter-midrange symmetrical design, with a pair of 3.5” high performance woofers and one 1” high definition, back-chamber loaded tweeter, which provides ultra-precise, defined, point source sound that can’t be achieved by traditional 2-way systems at close distances.
- Room Correction: iLoud MTM’s built-in self-calibration via included ARC reference microphone, means it adjusts in seconds to any placement, including ceiling-mounting, correcting their output to ensure the most precise, balanced sound from every position, without struggling with placement and spacing.
- Optimized DSP performance with 80 Hz cutoff filter for Atmos: iLoud MTMs are now available in the Dolby Audio Room Design Tool (DARDT) for Atmos systems for precise installation so you can quickly, easily and precisely install a multi-monitor setup that adheres to Dolby’s standards, anywhere.
- Lighter, smaller and easy to mount: Easy mounting with a threaded bottom so any iLoud MTM can be attached to any standard microphone stand or boom stand. iLoud MTM makes setting up a multichannel rig easy! At 30 – 50% smaller and lighter than comparable studio monitors, you’ll find setup a breeze in any size room. The iLoud MTM also includes a rubber base for horizontal placement and a tilting mount that angles from 0° to 20° for correct vertical positioning in a wide range of setups.
SE Electronics X1S Microphone
Large-diaphragm condenser microphone
- Polar pattern: Cardioid
- Handmade capsule
- Noise: 9 dB (A)
- Boundary sound pressure level: up to 160 dB (THD 0.5%)
- LoCut filter: 80 Hz, 160 Hz
- Pad: 0 dB, -10 dB, -20 dB
- Gold-plated XLR contacts
- Requires 48 V phantom power
- Dimensions (diameter x height): 58 x 168 mm
- Weight: 440 g
Universal Audio Volt 176 Audio Interface
Studio Equipment, Audio Interface, Microphones, audiolink, Soundcard, DJ-Equipment, Musical Instruments, Podcast Equipment, Processors
- 24 bit / 192 kHz AD/DA converter
- Integrated microphone preamp with vintage mic preamp mode
- Integrated 76 compressor (based on the UA 1176)
- +48 V phantom power switchable
- Headphone amplifier
- Direct monitoring
- USB bus-powered
- Compatible with PC (Windows 10 64 bit), Mac (macOS 10.14 Mojave or higher), iPad and iPhone (iOS 14 or higher)
SE Electronics X1S Studio Bundle
Large Diaphragm Condenser Microphone Studio Set
- Consisting of sE X1S microphone, sE RF-X acoustic screen, elastic suspension with pop screen and 3m microphone cable
Features sE X1S Microphone:
- Large-diaphragm condenser microphone
- Polar pattern: Cardioid
- Handmade capsule
- LoCut filter: 80 Hz, 160 Hz
- Pad: 0 dB, -10 dB, -20 dB
- Gold-plated XLR contacts
- Noise: 9 dB (A)
- Boundary sound pressure level: up to 160 dB (THD 0.5%)
- Requires 48V phantom power
M-Audio AIR 192|4 — 2-In/2-Out USB Audio Interface
- Capture Every Detail: Premium component selection and 24-bit/192kHz resolution for professional recording and monitoring to your Mac to PC
- Low Latency: Hi-Speed USB / USB-C circuitry gives you the fastest connection, with a class-leading round trip latency of only 2.59ms; USB and USB-C connection cables included
- Pristine Studio Grade Capture: Transparent Crystal preamps and ultra-pristine A/D converters for unsurpassed audio recording quality
- Connectivity: XLR ¼inches TRS combo input, (1) ¼inches instrument input, stereo ¼inches outs and ¼inches headphone out with independent level control
- Feature Packed: Rugged metal chassis, large central volume control, VU LED meters and USB/Direct knob for zero latency monitoring
- Software Included: ProTools | First, Ableton Live Lite, Eleven Lite, Avid FX Collection & Touch Loops content, plus the Creative FX Collection, Xpand!2, Mini Grand, Vacuum & BOOM from AIR Music Tech
Audio-Technica AT2020 Cardioid Condenser Studio XLR Microphone
- The price/performance standard in side address studio condenser microphone technology
- Ideal for project/home studio applications; The noise level is 20 dB SPL
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom engineered low mass diaphragm provides extended frequency response and superior transient response
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. Output connector: integral 3 pin XLRM type
It sounds first-class
Roland FA08
It offers a good complement of effects' and effects slots.
