IK Multimedia iLoud MTM 100W Studio Monitor Speaker (Pair), Portable & high-Performance Speaker with 3″ woofers & 3.5″ Tweeter
- Mix longer with less effort: iLoud MTM uses a midrange-tweeter-midrange symmetrical design, with a pair of 3.5” high performance woofers and one 1” high definition, back-chamber loaded tweeter, which provides ultra-precise, defined, point source sound that can’t be achieved by traditional 2-way systems at close distances.
- Room Correction: iLoud MTM’s built-in self-calibration via included ARC reference microphone, means it adjusts in seconds to any placement, including ceiling-mounting, correcting their output to ensure the most precise, balanced sound from every position, without struggling with placement and spacing.
- Optimized DSP performance with 80 Hz cutoff filter for Atmos: iLoud MTMs are now available in the Dolby Audio Room Design Tool (DARDT) for Atmos systems for precise installation so you can quickly, easily and precisely install a multi-monitor setup that adheres to Dolby’s standards, anywhere.
- Lighter, smaller and easy to mount: Easy mounting with a threaded bottom so any iLoud MTM can be attached to any standard microphone stand or boom stand. iLoud MTM makes setting up a multichannel rig easy! At 30 – 50% smaller and lighter than comparable studio monitors, you’ll find setup a breeze in any size room. The iLoud MTM also includes a rubber base for horizontal placement and a tilting mount that angles from 0° to 20° for correct vertical positioning in a wide range of setups.
IK Multimedia iLoud Precision 5 Monitor Speaker (Pair)
- Speaker configuration: 5" midrange/woofer, 1.5" tweeter
- Total RMS power: 135 watts
- Max. SPL 1m: 114.5 dBA
- Frequency range: 46 to 30,000 Hz
- Coherent phase response +/-20° from 150 Hz upwards
- Coherent time response over the entire audio spectrum
- Fully automatic integrated digital calibration via supplied measuring microphone
IK Multimedia iLoud Precision 6 Monitor Speaker (Pair)
- Speaker configuration: 6" mid-woofer, 1.5" tweeter
- Total RMS power: 150 W
- Max. SPL 1m: 116 dBA
- Frequency range: 45 to 30,000 Hz
- Coherent phase response +/-20° from 150 Hz upwards
- Coherent time response over the entire audio spectrum
- Fully automatic integrated digital calibration via supplied measuring microphone
IK Multimedia iLoud Precision MTM Monitor Speaker (Pair)
- Speaker configuration: 2x 5" midrange/woofer, 1.5" tweeter
- Total RMS power: 175 W
- Max. SPL 1m: 119 dBA
- Frequency range: 45 to 30,000 Hz
- Coherent phase response +/-20° from 150 Hz upwards
- Coherent time response over the entire audio spectrum
- Fully automatic integrated digital calibration via supplied measuring microphone
IK Multimedia iRig Keys I/O 49 49-Key Music Creation Workstation with Integrated Audio Interface
- All-in-one, fully portable, ultra-compact MIDI controller with 24-bit/ 96Khz capable input/output audio interface for iPhone, iPad, Mac and PC
- 49 full size keys and smooth, velocity-sensitive, synth-action keyboard
- Comprehensive controls: 2 slider strips for pitch and modulation (user programmable,) octave, Program change and transport controls
- Neutrik combo input jack for line, instrument or microphones, with 48V phantom power and balanced stereo and headphone outputs
IK Multimedia iRig Stream
Audio Interface, audiolink, Conference System, Other Accessories, Receivers, Amplifiers, DJ-Equipment, Instrument Amplification
- For streaming applications with mobile devices or computers
- Adjustable stereo RCA input for line signals
- Level indicator with 3 LEDs
- Connection for headphones or headsets with a 3.5 mm jack, CTIA, including mic level- and volume control
- Direct monitoring for real-time monitoring or playback
- Quality AD/DA conversion with up to 24 bit / 48 kHz
- Powered via USB or power supply (power supply available under Article Nr 417705, not included)
- Frequency range: 20 - 20,000 Hz
JBL 305P MKII Monitor Speaker (pair)
Soundtrack, Beats, Studio Equipment, Monitor Speakers, Amplifiers, DJ-Equipment, Musical Instruments, Speakers, Studio packages
- Equipment: 5" Woofer and 1" tweeter
- 2-Way class-D amplifier 82 watts - 41 watts woofer and 41 watts tweeter
- Frequency response (+/- 3dB): 49 - 20,000 Hz
- Maximum level: 108 dB
- Input sensitivity adjustable +4 dBu / -10 dB
- Boundary EQ
- HF trim switch
- Line input XLR and 6.3 mm jack balanced
- 15 mm MDF housing
JBL 306P MKII Monitor Speaker (pair)
JBL 308P MKII Monitor Speaker (Pair)
- Equipment: 8" Woofer and 1" tweeter
- 2-Way Class-D amplifier
- Power: 112 W - 56 W woofer and 56 W treble
- Frequency range: 45 - 20,000 Hz (+/- 3 dB)
- Max. SPL: 112 dB (peak)
- Input sensitivity adjustable +4 dBu / -10 dB
- Boundary EQ
- HF trim switch
- Connections: Line input XLR and 6.3 mm jack balanced
- 15 mm MDF housing
Jumbo Studio Pack (Combo Studio Package)
Studio Equipment, Audio Interface, Headphones, Musical Instruments, Mic Stand, Pianos and Keyboards, Midi Keyboards, Midi Keyboards, Monitor Speakers, Soundcard, Studio Mics, Microphones, Sales and Promos, Speakers, Studio packages
Junior Studio Pack (Combo Studio Package)
Studio Equipment, Audio Interface, Headphones, Musical Instruments, Mic Stand, Midi Keyboards, Pianos and Keyboards, Midi Keyboards, Monitor Speakers, Soundcard, Studio Mics, Microphones, Sales and Promos, Speakers, Studio packages
KALI AUDIO IN-5 Studio Monitor Speaker (Pair) – 5 Inch 3-Way Design
- Advanced Studio Monitors - The IN-5 Studio Monitor is a speaker like no other; the IN-5 has a midrange driver that surrounds the tweeter and acts as its waveguide.
- 3-Way Monitor - Unlike conventional 2-way speaker designs, the IN-5 features 3 drivers for low, mid, and high frequencies, offering realistic, accurate stereo imaging you have to hear to believe.
- Low Distortion - The IN-5’s total harmonic distortion is less than 1.4%, which is exceptional. This is the result of unburdening both the woofer & the tweeter creating less work for both.
- Next Level Recording Studio Equipment - We designed the IN-5 for producers who need to move a step above the average studio monitor. All of this means that the IN-5 is extremely accurate and easy to mix on, and that mixes made on the IN-5 will transfer wonderfully to other systems.
